Download the manual here.

Taking care of your sparkling water maker is super easy. Clean with a soft, damp cloth in lukewarm water. Avoid using abrasive cleaners or sharp tools to clean. Wipe spills to keep base dry. NEVER submerge in water or wash in a dishwasher.

We're glad you asked, because sparkling water is kind of our thing :)To carbonate water with your One Touch sparkling water maker, follow these simple steps:1. Fill your carbonating bottle with fresh cold tap or filtered water just to the "Fill Line" indicator. Pro-tip: keep a 2nd carbonating bottle full of tap water in the fridge so you always have a fresh bottle to carbonate. 2. Make sure you insert the carbonating bottle correctly. There will be a small gap between the bottom of the carbonating bottle and the base of the sparkling water maker when properly installed. 3. Choose...

It's easy! 1. Place your One Touch sparkling water maker on a flat sturdy surface in an upright position.2. Remove the back cover.3. Insert the gas cylinder into the cylinder holder located on the underside of the carbonating button and screw it in, twisting clockwise. Apply gentle pressure until it is firmly held in place. Hand-tighten only, DO NOT use tools. 4. Replace the back cover so that it clicks into place.5. You're all ready to carbonate! Bask in that bubbly and enjoy :)

It's easy! Place the sparkling water maker on a flat sturdy surface in an uprightposition. Before inserting the carbonating bottle, make sure that the bottle rest is angled forward. If it isn’t, pull it towards you until it clicks. DO NOT pull the carbonation tube. Insert the carbonating bottle neck into the Snap-Lock. Push the bottle up and back. The Snap-Lock will catch the bottle and hold it in a vertical positionsuspended above the base.NOTE: When properly inserted there is a small gap between the bottom of the carbonating bottle and the base of the sparkling water maker, so that's...